Home | Images | Contact Us
About KDY characteristics Varieties application Install Products packing



Project Tender for Ghana.

SPEC DETAILED SPECIFICATION STATEMENT COMPLIANCE
1 Crown Agents Specification Number
2 Bidders are to offer standard items most closely matching the specification below and must provide technical details of the items offered.
Bidders must enter "Comply" or "Not comply" against each paragraph of this specification, comment as necessary, and sign and stamp each page. Failure to complete this statement of compliance may result in the offer being rejected.
Units are to be stated using the SI system. For example length in metres (m). Multiples and sub-multiples to be used are: 106 mega (M); 103 kilo (k); 10-3 milli (m) and 10-6 micro (μ).
3 WIRE MESH FENCING & RAZOR WIRE
4 Application There is a requirement for a variety of hot dipped galvanised steel razor wire, barbed wire and chain link fencing. Bidders are required to offer all the items. Bids which do not offer all items will not be considered. The items shall be in accordance with the specifications given below. To export specification and fully suitable for service in the country stated. For use in Ghana.
5 GENERAL REQUIREMENT
5.1

The following items are required:-

1.Razor Wire Rolls, barb length 28 mm
2.Razor Wire Rolls, barb length 60 mm
3.Barbed Wire, wire diameter 2.5 mm
4.Chain Link Fence, wire diameter 3.0 mm
5.Chain Link Fence, wire diameter 2.5 mm

6 RAZOR WIRE ROLLS, BARB LENGTH 28 mm (ITEM No. 1)
6.1 MANUFACTURER:
6.1.1 PRODUCT IDENTIFICATION NUMBER:
6.1.2 COUNTRY OF MANUFACTURE:
6.2 TYPICAL PROFILE: This profile is for guidance only. The text of the specification will take precedence.
6.3 Quantity Required: 3,900 rolls
6.4 Material of Construction: Hot dipped galvanised steel wire.
6.5 Wire & Barb Dimensions
6.5.1 Wire Diameter: 2.5 mm
6.5.2 Barb Thickness: 0.5 ± 0.05 mm
6.5.3 Barb Length: 28 ± 1.0 mm
6.5.4 Barb Width: 15 mm
6.5.5 Barb Spacing: 45 ± 1.0 mm
6.6 Razor Wire in Coil Form
6.6.1 Coil Outside Diameter: 700 mm
6.6.2 Number of Loops: 56
6.6.3 Coil Length: 13 – 14 m
6.6.4 Number of Clips: 5
7 RAZOR WIRE ROLLS, BARB LENGTH 60 mm (ITEM No. 2)
7.1 MANUFACTURER:
7.1.1 PRODUCT IDENTIFICATION NUMBER:
7.1.2 COUNTRY OF MANUFACTURE:
7.2 TYPICAL PROFILE: This profile is for guidance only. The text of the specification will take precedence.
7.3 Quantity Required: 2,000 rolls
7.4 Material of Construction: Hot dipped galvanised steel wire.
7.5 Wire & Barb Dimensions
7.5.1 Wire Diameter: 2.5 mm
7.5.2 Barb Thickness: 0.6 ± 0.05 mm
7.5.3 Barb Length: 60 ± 2.0 mm
7.5.4 Barb Width: 32 mm
7.5.5 Barb Spacing: 100 ± 2.0 mm
7.6 Razor Wire in Coil Form
7.6.1 Coil Outside Diameter: 700 mm
7.6.2 Number of Loops: 56
7.6.3 Coil Length: 13 – 14 m
7.6.4 Number of Clips: 5
8 BARBED WIRE (ITEM No. 3)
8.1 MANUFACTURER:
8.1.1 PRODUCT IDENTIFICATION NUMBER:
8.1.2 COUNTRY OF MANUFACTURE:
8.2 TYPICAL PROFILE: This profile is for guidance only. The text of the specification will take precedence.
8.3 Quantity Required: 400 rolls
8.4 Material of Construction: Hotdipped galvanised steel wire.
8.5 Wire & Barb Dimensions
8.5.1 Wire Diameter: 2.5 mm
8.5.2 Barb Size & Type: standard
8.6 Roll Length: 100 m
9 CHAIN LINK FENCE, 3.0 mm (ITEM No. 4)
9.1 MANUFACTURER:
9.1.1 PRODUCT IDENTIFICATION NUMBER:
9.1.2 COUNTRY OF MANUFACTURE:
9.2 TYPICAL PROFILE: This profile is for guidance only. The text of the specification will take precedence.
9.3 Quantity Required: 200 rolls
9.4 Material of Construction: Hot dipped galvanised wire, PVC coated.

9.4.1

Coating Colour: Green
9.5 Pattern: Diamond
9.6 Dimensions
9.6.1 Steel Wire Diameter: 2.0 mm
9.6.2 Wire diameter including PVC coating approximately 3.0 mm
9.6.3 Roll Width: 1,830 mm
9.6.4 Roll Length: 18.3 m
10 CHAIN LINK FENCE, 2.5 mm (ITEM No.5)
10.1 MANUFACTURER:
10.1.1 PRODUCT IDENTIFICATION NUMBER:
10.1.2 COUNTRY OF MANUFACTURE:
10.2 TYPICAL PROFILE: This profile is for guidance only. The text of the specification will take precedence.
10.3 Quantity Required: 240 rolls
10.4 Material of Construction: Hot dipped galvanised steel wire.
10.4.1 Pattern: Diamond

10.5

Dimensions

10.5.1

Wire Diameter: 2.5 mm

10.5.2

Roll Width: 1,830 mm

10.5.3

Roll Length: 18.3 m
11 Inspection and Tests
11.1 Items may be subject to inspection and testing by an appointed Inspection Service. Inclusion of this inspection in a contract DOES NOT remove any liability of the contractor to perform their obligations under the terms of the contract.
11.2 Packaging & Protection
11.3 All items are to be suitably packed for shipment by ISO container. Bundles to be securely strapped. The product is to be suitably protected to retain its integrity during transit and storage in a tropical climate. For Wires (Item 1, Item 2 and Item 3): Packaging – Covered with Jute Sack. For Chain Link Fence (Item 4 and Item 5): Packaging – Covered with Paper, then Jute Sack.
12 DOCUMENTATION
12.1 Required with the offer.
12.1.1 Manufacturer’s illustrated technical literature and data sheets for all items offered in English showing material, dimensions and all relevant information.
Welded razor mesh
Electrified Concertina wire
razor wire Mobile Security Barrier
razor strip
Flat Razor Wire Panel
PVC Coated Razor Wire
razor wire fencing
razor wire flatwrap
Concertina razor coil
Concertina Wire
Razor Barbed wire
Razor Wire Machine
Stainless Steel Bird Spike
Pigeon Spike
High Security Razor Wire Fencing
Thermal Galvanized Barbed Tape
Razor Ribbon
Stainless Steel Razor Wire
Mobile Security Barriers Specifications
 
ADD: No. 112 Dong Fang Hong Road,Dezhou City, Shandong Province.
 
E-mail: razorwire@razorwireconcertina.com
TEL: +86-534-2650118-609    FAX: +86-534-2650118-900
 
URL: http://www.razorwireconcertina.com
© KDY Concertina Razor Wire Factory